0107 5 14
Notice Date Page
01201138
INSTRUCTION
HANDBOOK
14. Preventive maintenance
Colorants
Do not input colorant in the machine with very hot water. Very hot
water react with the colorant, which creates a very corrosive solu-
tion. The colorants must be input with cold water or warm water
which temperature doesn’t exceed 50°C (122°F).
CAUTION
To ensure that your machine gives the very best service, please take
care that maintenance is carried strict accordance with the instruc-
tions above mentioned.
Frictional electricity
Some textiles may generate frictional electricity causing damages
when calendering. In most cases, this can be avoided by using at
the last rinse a softener with an antistatic agent.
Chlorine
Chlorine introduced in a rinsing bath at a temperature of more than
40°C (104°F) affects stainless steel.
The chlorometric degree should be between 47° and 50°.
(1° chlorometric degree corresponds to 3.17 g (0.11 oz) of active
chlorine).
The chlorine concentration should not exceed the ratio indicated,
or the stainless steel may be affected. Check the concentration
ratio of your products.
The javellization should be of 10 to 15 cm³ / kg (0.28 to 0.42 cu in/lb)
of linen.