0107 51 11

Notice Date Page

01201138

INSTRUCTION
HANDBOOK
11. Machine
operation
Zero calibration (for machines with weighing equipment installed only)
If you wish to calibrate zero for
the weighing equipment :
This screen shows you have
calibrated zero.
Please note :
The machine must be unladen during this calibration,
i.e. no water or wash load in the drum.
Zero calibration
The "Zero calibration" function is used to increase the
accuracy of the weighing equipment. This should be
done once a month.
If this calibration has not succeeded you will see an er-
ror message equivalent to: "FAILED. PRESS SELECT"
on the display.
For troubleshooting, see the section "Fault-fi nding,
weighing equipment" in the machine manual.
Press SELECT.
Press six times to high-
light "ZERO CALIBRATIONN".
Press SELECT.
Press SELECT.
SCALE ADJUSTMENTS
SELECT
ZERO CALIBRATION
DONE !
PRESS SELECT
SELECT
SCALE ADJUSTMENTS
SELECT
ZERO CALIBRATION
PRESS SELECT FOR
ZERO CALIBRATION
SELECT
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SET TARE TO A CERTAIN VALUE
READ TARE VALUE
CALIBRATE THE SCALE
ZERO CALIBRATION
READ VERSION NUMBER
EXIT
SERVICE PROGRAM
SELECT
MAKE A CHOICE :
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SET TARE TO A CERTAIN VALUE
READ TARE VALUE
CALIBRATE THE SCALE
SELECT