01201138 | 0807 | 7 | 11 | 11. Machine | |
Notice | Date | Page | operation | ||
|
INSTRUCTION
HANDBOOK
To start the wash program
RUN A WASH PROGRAM
GO TO THE MENU
MAKE YOUR CHOICE WITH
OR AND PRESS SELECT
WEIGHT, KG 000,0
SELECT
RUN A WASH PROGRAM
GO TO THE MENU
RUN A WASH PROGRAM
GO TO THE MENU
SELECT
RUN A WASH PROGRAM
ENTER A PROGRAM NUMBER :
0
SELECT FROM LIBRARY
PCS SMC | 993 |
991
SELECT
If the menu is not currently displayed :
Press 
repeatedly.
If « GO TO THE MENU » is highlighted :
Press .
When « RUN A WASH PROGRAM » is highlighted :
Press SELECT.
Here you can select pro- grams from the program libra- ries. See the section entitled "To start a wash program from the program library".
Displayed here will be the number of the most frequently used program. S993 would indicate the number of a pro- gram on a memory card.
Press this key if you want to select program.
Use the numeric key to en- ter the program number.
Press SELECT.
Two way of starting a program
By entering the actual program number Enter the actual program number if you know it, then press SELECT.
By starting from the program library (see section «To start a wash program from the program library»)
If you are unsure about the programs available, you can select a program from the program library, where the programs are listed with their descriptions.
If you have entered a wrong number…
Enter the correct number to overstrike the earlier one.
Note: you must always enter three digits, even when the number is really only a one or
Examples :
The program number required is 9. Enter 009 to over- strike all digits in the wrong number.
The program number required is 19. Enter 019 to overstrike all digits in the wrong number.
RUN A WASH PROGRAM
ENTER A PROGRAM NUMBER :
0
FROM PCS OR SMC ?
PCS 
SMC
993
PCS
SMC
If you have a memory card in the program control unit, and the program you selected is both on the memory card and in the PCU, you will be asked "FROM PCS OR SMC ?".
Press PCS if you want to take the program from the PCU.
Press SMC if you want to take the program from the memory card.
In some of the text shown on the display, Clarus Control is referred to as PCS and the memory card is referred to as SMC.
Memory cards
A memory card is a plastic card, the size of a credit card, with an electronic memory chip inside it. This card is capable of storing 10 to 15 wash programs of normal size. If the programs are mostly small ones, more of them can be stored, whereas larger programs will reduce the number which can be held by the card. Memory cards of this type can be used to :
•transfer wash programs from one washer extractor to another
•run wash programs straight from the card
•transfer wash programs from a PC to a memory card and from a memory card to a PC (these proce- dures, and how to write a wash program on a PC, are described elsewhere).
Memory cards are described in detail in the section
entitled "The Memory card".
