INSTRUCTION
HANDBOOK
9. Installation
01201138 | 0408 | 1 |
|
|
|
Notice | Date | Page |
|
|
|
9
You should have found an instruction handbook and keys to open the machine casings, in the machine.
Depending on its destination, the washer extractor is delivered bare or may be placed on a transport pallet and/or packed with plastic fi lm.
In some cases, it may be delivered in a crate, or in maritime packing (wood box).
Please refer to the handling chapter in this instruction handbook for a description of handling operations.
Unpacking
Take off the plastic fi lm or remove the four wood socles with an spanner.
Check that no damage has been caused during transport.
Installation
The installation must be done by competent technicians in accordance with local codes and regulations. When there are not local codes and regulations, the installation must be comply with European standards applicable.
The machine must be installed on a perfectly even surface, strong and horizontal, capable resisting to the efforts shown in the technical characteristics.
Adjustment of the machine by addition of level plate should be avoided.
Control the horizontal level using a water level placed on the machine's sole.
Place the washer extractor so that it is easy for the user and the service technician to do their work.
Leave at leasy 1 m (40") (according to the recommendation in standard EN 60204) between the machine, a wall or any other machine at the sides.
40" | 40" |
| |
water |
|
level |
|
40"
water
level
D0621A
