0107 68 11
Notice Date Page
01201138
INSTRUCTION
HANDBOOK
11. Machine
operation
Checking accuracy of weighing equipment display
Twice a year you need to check that the
weighing equipment is displaying the ac-
curate weight, with the aid of an object of
known weight. If the weighing equipment
does not show the real weight of this object,
you will need to follow the "Zero calibration"
procedure, a function in the Clarus software.
Follow the instructions under "Zero calibra-
tion" in the "Machine operation" section
of the manual. If this is unsuccessful, the
weighing equipment will have to be recali-
brated using the "Calibrate the scale" func-
tion, as described under "Machine opera-
tion".
If the weighing equipment has a fault
Follow the troubleshooting procedure under
the heading "Fault-fi nding, weighing equip-
ment".
If you cannot rectify the problem with the
help of that section, make a note of the
weighing equipment version number before
you contact the service department.
To fi nd the weighing equipment version
number, access the service program, select
"Scale adjustments", then "Read version
number".