3-16 GETTING STARTED
MON2000
Configuring Your Printer JULY 2010
The stream sequences can be changed in the
System dialog box. (GC applications version
1.7 and above.)
• Automatic calibration in the Analog
Outputs dialog box
• Report display
• GC report request (GC applications version
1.7 and above)
• MON2000 printer control (GC applications
version 1.7 and above)
• View archive data
• Trend data
• Maintenance Log editing (GC applications
version 1.7 and above)
• Alarms (except clear/ack all active alarms)
•Event log
• Chromatogram viewer (including forced
calibration using archived chromatograms)
• Start Auto-Sequencing
• Start single stream
• Halt analysis
• Start calibration
• View and set GC time (GC applications
version 1.7 and above)
3.7 CONFIGURING YOUR PRINTER
Use this function to configure the settings for
the printer connected to your PC. This
configuration will apply to any print job queued
from MON2000.
The settings available depend on the printer
type. Refer to the manufacture’s user manual
for more information.
1. Use the File > Print Setup menu to access
this function.