9-34 MON2000 PLUS DATA COLLECTION/AUTO-POLLING
MON2000
Repeat Command JULY 2010
9. From the Output File table, enter/edit the
filename and file format (*.txt or *.csv) for
the Reports Output file.
10.Click the button to apply the
configuration changes.
Or,
11.Click the button to discard your
changes and return to the Configuration for
Data Collection window.
9.2.20 Repeat Command
Use the Repeat command to instruct the Auto-
Sequencing module to restart processing of the
commands in the polling control file (from the
beginning of the file). Specify a count for the
number of times to execute the sequence of
commands in the file. Without a specified count
(or with a count of zero) the sequence of
commands will be re-executed indefinitely until
terminated manually by the user.
To configure the Repeat command,
1. From the General Configuration List of
Commands pull-down list, select Repeat.
2. Enter the number of times to repeat the
Auto-Sequencing process, in the Repeat
Count field.
3. Enter a description for the Repeat
Command in the Command Description
field.