5-78 APPLICATION FUNCTIONS
MON2000
Com ID JULY 2010
Figure 5-4 Phoenix Plug Port to External Modem DB-25 Port
5.18.3 Com ID
The GC Controller Com ID is usually preset at
the factory and defined by the DIP switch
settings on the controller system interface
board. Five switches are reserved for defining
the Com ID; therefore, Com ID values range
from 1 to 31.
Normally it is not necessary to change the Com
ID value to anything other than 0. Setting the
Com ID to zero allows the MON2000 software
to automatically recognize the Com ID defined
by the controller DIP switches. When
connected, MON2000 displays the controller
DIP setting as the Com ID in the main window
titlebar. See Table 5-15 for more information.