APPLICATION FUNCTIONS 5-81
MON2000
JULY 2010 Registers
3. From the Serial Ports dialog, click the
button or press the F3 key.
4. The Registers dialog appears.
5. View or edit data. Double-click a given table
cell or use one of the edit function buttons,
described below, to make your changes.
Note that the Reg column displays the
number for the GC Controller Modbus
register that will be polled by a connected
data acquisition system.
6. To change a variable assignment, click the
appropriate Variable cell. Use the provided
pull-down menu and click the desired
variable to select it.
From the Variables menu, you can assign
the results of optional base pressure(s) to
the Modbus register. See Section 5.18.5.
For each default 0 FloatPt scale assigned, reserve 2
Modbus registers for a given variable.
Scale assignments other than 0 FloatPT require
only one register per variable.