2-2 INSTALLATION AND SETUP
MON2000
System Requirements JULY 2010
-Windows
® 98 version 1 or later
-Windows
® 2000 version 1 or later
-Windows
® XP version 1 or later (see note
for system requirements)
-Windows
® NT Server version 4 (service
pack 3 or later)
• 16 megabytes (MB) of RAM (32 MB or
higher recommended)
• 5 MB of free hard disk space
• Super VGA monitor with 800x600
resolution
• free serial port for remote/local connection
to gas chromatograph (for online operations)
• free parallel port for connection to printer
•Windows
® -compatible modem (for remote
connection only)
• Ethernet connection (when using Ethernet
networking)
Use the Settings>Control Panel>System/>General Page menu to check the system version
number.
For Windows® 95, the version number should be 4.00.950A/B or later.
For Windows® 98 or Windows® 2000, the version number should be 1 or later.
To use Windows® XP you need:
• C omputer/Processor PC with 300 MHz or higher processor clock speed recommended;
• 2 33 MHz minimum required (single or dual processor system)
•*Intel
® Pentium®/CeleronTM family, or AMD-K6®/AMD AthlonTM/AMD DuronTM family,
or compatible processor recommended.
• Memory: 128 MB of RAM or higher recommended (64 MB minimum supported; may limit
performance and some features).
• Hard Disk Minimum: 1.5 GB of available hard disk space.
For Windows® NT4, the version number should be 4.00.1381 or later.