2-50 INSTALLATION AND SETUP
MON2000
BASIC 2350A CONFIGURATION JULY 2010
The serial port setup in the MON2000
Software for COM4 must be selected as
Front Panel (see Figure 2-4). If all four
serial ports are required for
communications on a system with
keyboard and display, an optional
COM4A Board must be installed and a
COM7 and COM8 cable (P/N 3-2350-086)
connected (see Figure 2-5). The serial
port setup in the MON2000 Software for
COM8 must be configured as Front
Panel. See Figure G-4b.
(f) Reinstall the Analog cable to J6 on the
System Interface Board.
(g) Place the "Unit Updated to 2350A" label,
included with the upgrade kit, on the
instruction decal located on the inside,
right wall of the explosion-proof units or
on the card cage of the rack or panel
mount units.