CONTROL FUNCTIONS 4-1
MON2000
JULY 2010 Auto Sequence
4
CONTROL FUNCTIONS
The options in the Control pull-down menu
allow you to initiate various operating modes of
the gas chromatograph (GC) unit.
4.1 AUTO SEQUENCE
Use this function to start continuous GC
analysis runs that follow a predefined stream
sequence. At the initial startup, the current
stream (in the stream sequence) is the first
stream analyzed. See Section 5.8 for detailed
instructions on configuring the predefined
sequence.
1. Use the Control > Auto Sequence menu or
press the F2 key to access this function.
2. The Start Auto Sequence dialog appears.
3. Click the Purge check box to set the purging
option. Note that the default setting is ON.
Purging allows sample gas to flow through
the sample loop for 60 seconds prior to
beginning the first analysis.
4. Click the button to continue.
Click the button to abort and
return to the main window.
5. The Auto Sequence GC Analysis begins (if
you selected the Purge Stream option,
MON2000 performs this 60-second task
first).
Use the Report Display
option in the Reports menu
to view the results of the
Auto Sequence function.