5-86 APPLICATION FUNCTIONS
MON2000
Setting Optional Base Pressures JULY 2010
5.18.5 Setting Optional Base Pressures
As discussed in Section 5.18.4, you can assign
GC analysis variables to various Modbus
registers. Follow the procedure below to add
the “Optional Base Pressure” variable to the
Registers List.
Up to three (3) optional base pressures can be
used for GC analysis calculations. These
optional base pressure values are entered via
the Streams function (see Section 5.8).
• “Results - Opt. Base Press” – A group of 12
GC analysis calculations can be used to
reflect the use of different base pressures.
See Section C.3 for more information.
To assign the “Optional Base Pressure”
variable,
1. Verify the values for optional base pressures
that have already been entered.
(a) Use the Application > Streams menu to
access this function.
(b) The Streams dialog box displays.