9-2 MON2000 PLUS DATA COLLECTION/AUTO-POLLING
MON2000
Overview JULY 2010
All Model 500 and 1000 GC’s with 2350A and
older 2350/2360 GC Controllers and Model 700
GC Controllers are supported in the acquisition
of the following types of data:
• Alarms - Selection of Alarm Log, Active
Alarms, or Unacknowledged Alarms.
• Averages - Direct Access to single averages
and/or blocks of averages to include support
for acquiring results from most recent
averaging period as well as those for
previous averaging periods (number limited
by number supported by specific model and
application). Access to average value,
maximum value, minimum value, and
number of samples for the period to be
supported.
• CGM Archive - Selection of Last Analysis or
Last Calibration and Stream number.
• CGM on Alarm - Poll the CGM when an
alarm condition is set or cleared.
• Event Log - Selection of Start/End time,
Most Recent n Days, Since Last Collected,
or Entire Log.
• Maintenance Log - Selection of Start/End
Time, Most Recent n Days, Since Last
Collected, or Entire Log
• Registers - Both User Modbus and
SIM_2251 single and multiple register
queries are supported.
• Reports - Archive data accessible via
Reports>Archive Data>View Data menu are
available (selection based on most recent
number of days, date range, single stream
or all streams). Selections are based on the
various GC model and are consistent with
the capabilities of those models and specific
applications.