UPGRADE 2350A GC S/W AND 2350 EPROMS E-15
MON2000
JULY 2010 Procedure
(c) Change Drive C:\ to NONE by pressing
PAGE DOWN. Verify that Drive A:\ is the
only selected drive. Press ESCAPE, F10 (to
save changes), Y (to verify that you want
the changes to be made), then ENTER.
5. The CPU assembly will reboot and displays
the Systems Configuration window. The
speaker on the CPU will chirp and the
monitor will prompt:
“ENTER NEW DATE (mm-dd-yy)". Press
ENTER.
"ENTER NEW TIME:". Press ENTER.
The A:\> prompt is displayed. Verify that
the programming disk is the current
revision specified on the work order package
and it insert into the floppy drive. Type
INSTALL.
6. As the DiskOnChip is being programmed,
the following information is displayed:
A:\> SYS C:
SYSTEM TRANSFERRED
A:\>CD IMAGE
A:\IMAGE>COPY *.*C:\
BOS.EXE
PME16.EXE
SCANDISK.EXE
SCANDISK.INI
AUTOEXEC.BAT
BOSCHECK.EXE
6 FILE(S) COPIED
A:\IMAGE>CD\
A:\>
A:\>
7. At the A:\> prompt, type C:, then ENTER.
8. Type PME16, then ENTER.