2-48 INSTALLATION AND SETUP
MON2000
Conversion Process JULY 2010
• Switch "6" is a spare for future use.
Switches "7" and "8" are set as needed
for the presence of an optional LOI
(Local Operator Interface) connected via
COM8 When the COM4A Board is
installed. If the COM4A Board is not
installed, the LOI is connected via
COM4.
Table 2-5 Dip Switch Settings Switch Positions
COM ID 123 45
1 ON OFF OFF OFF OFF
2 OFF ON OFF OFF OFF
3 ON ON OFF OFF OFF
4 OFF OFF ON OFF OFF
5 ON OFF ON OFF OFF
6 OFF ON ON OFF OFF
7ONONONOFFOFF
8 OFF OFF OFF ON OFF
RAM CLEAR
Dip Switch Setting Positions
8
Clears RAM when unit is powered down ON
Keeps RAM data when unit is powered down OFF