5-8 APPLICATION FUNCTIONS
MON2000
Component Data JULY 2010
Table 5-2 Description of Standard Parameters in a CDT
Item Function Edit
Number (#) component number
An index number that acts as an identification
label when used in other menus/dialogs (e.g., Limit
Alarms, Analog Outputs). Up to 20 components
can be defined per data table.
Component names assigned to the various components
displayed
Components can be selected from the standard
list, by pressing the F2 key (see Section 5.2.1), or
entered by the user. Up to 15 characters can be
used for the component name.
USR/STD whether the component data is standard or user-
defined
If the component was added by the Select
Standard Component function (see Section 5.2.1)
and no changes were made to the component data,
STD displays. If the component was added
manually by the user or modified, USR displays.
Detector ID component detector number
Retention Time time in seconds that apex of the component peak
will appear
Range = 0 to 6000 seconds
Response Factor equal to the raw data of component peak divided
by component concentration
The maximum value is 1.0E+38.
Ensure that the component retention times do
not exceed the analysis time, as defined by the
TEV Table (see Section 5.3). MON2000 does not
automatically prevent the user from defining
excessive component retention times.