5-80 APPLICATION FUNCTIONS
MON2000
Registers JULY 2010
5.18.4 Registers
To accommodate installations that use Modbus
registers and the User_Modbus protocol,
MON2000 enables you to assign GC analysis
variables to registers.
See Appendix F for more information regarding
GC Modbus registers.
For a list of variable assignments made to all
registers, print the communication section of
the PC Config Report.
To assign GC analysis variables and scale
ranges,
1. Use the Application>Serial Ports menu to
access this function.
2. The Serial Ports dialog displays.
This function is not required for normal GC operation.
Only use this function if you are designing a special
installation to directly access the GC Controller Modbus
registers.