CONTROL FUNCTIONS 4-3
MON2000
JULY 2010 Halt
6. Click the button to accept your
selections and continue.
Click the button to abort and
return to the main window.
7. The Single Stream GC Analysis begins (if
you selected the Purge Stream option,
MON2000 performs this 60-second task
first).
Use the status bar to monitor the progress
of this function.
4.3 HALT
Use this function to stop the current operation
mode at the end of the run in progress.
1. Use the Control > Halt menu or press the F3
key to access this function.
2. MON2000 prompts you to confirm your
selection.
Click the button to proceed.
Click the button to abort and return
to the main window.
3. After the current run finishes, the function
stops and “Idle” appears in the status bar.
Use the Report Display
option in the Reports menu
to view the results of the
Single Stream function.