9-12 MON2000 PLUS DATA COLLECTION/AUTO-POLLING
MON2000
Delay (Hours) Command JULY 2010
To configure the Delay (Seconds) Command,
1. From the General Configuration List of
Commands pull-down list, select Delay
(Seconds).
2. Enter the time delay, in one second
increments, in the Delay field.
3. Enter a description for the Delay (Seconds)
command in the Command Description
field.
9.2.7 Delay (Hours) Command
Prior to executing the auto-polling function, the
Delay(Hours)Command instructs the Auto-
Sequencing module to delay for a specified
interval of time. The user enters the time delay
in one hour increments.
To configure the Delay (Hours) Command,
1. From the General Configuration List of
Commands pull-down list, select Delay
(Hours).
2. Enter the time delay, in one hour
increments, in the Delay field.
3. Enter a description for the Delay (Hours)
command in the Command Description
field.