APPLICATION FUNCTIONS 5-61
MON2000
JULY 2010 Temperature Control
5.14 TEMPERATURE CONTROL
Use the Temperature Control function for
monitoring the Temperature of the Oven
(Detector/s and Columns) and the Stream
Switching block to determine when the
Model 700 is thermally stable. The bottom row
labeled Temperature (C) displays the current
temperatures.
The settings and values are shown in the
following figure and table. The settings and
values are preset at the factory and are based
on the specific customer application. These
values should not be changed unless
recommended by Daniel Customer Service
Personnel, or it is a factory application
requirement.
1. Use the Application>Temperature Control
menu to access this function.
2. The Temperature Control dialog displays.