4-6 CONTROL FUNCTIONS
MON2000
Baseline Run JULY 2010
1. Use the Control > Baseline Run menu to
access this function.
2. The Start Baseline Run dialog appears.
MON2000 displays the stream to be used
for the baseline run.
To select which stream is used for the
baseline calibration, See Section 5.8.
3. Click the button to continue.
Click the button to abort and
return to the main window.
Use the status bar to monitor the progress
of this function. Use the Report Display
option in the Reports menu to view the
results of the Baseline Run function?
If the GC unit is in Auto Sequence mode, MON2000
prompts that the continuous analysis must be stopped.
Halt the analysis (See Section 4.3) and wait for an Idle
status. Then continue initiating the baseline run.