E-14 UPGRADE 2350A GC S/W AND 2350 EPROMS
MON2000
Set-Up and Programming JULY 2010
3. Return and secure the Card Cage Assembly
its original position in the chassis mounting.
Tighten the four screws.
4. Return and secure the field wiring TB in its
original position. Tighten the six screws.
5. Reconnect the AC power cord to J21 on the
TB, and restore AC power to the 2350A GC
Controller.
E.8 SET-UP AND PROGRAMMING
The purpose of this procedure is to define the
CMOS table set-up and programming
requirements for the CPU assembly and
DiskOnChip.
E.8.1 Procedure
1. Install the blank DiskOnChip into socket
U1 on the CPU assembly, noting the
orientation of pin 1.
2. Plug the floppy drive cable into J10 on the
CPU assembly and plug the board into the
card cage.
3. Plug the keyboard cable into J1 on the CPU
assembly.
4. Turn on the power. When the video displays
on the monitor, press the DELETE button to
access the CMOS setup window.
(a) The Standard CMOS Setup window
displays. Press the ENTER button.
(b) Set time and date by either PAGE UP,
PAGE DOWN, or by entering the
appropriate number value. After making
the desired change, press ENTER.