9-10 MON2000 PLUS DATA COLLECTION/AUTO-POLLING
MON2000
Connect/Logon Command JULY 2010
9.2.4 Connect/Logon Command
The Connect/Logon command instructs the
Auto-Sequencing module to establish
communications with the indicated GC
controller, using the communication method
and parameters as indicated in the GC
directory entry and logon to the GC Controller.
After selection of the Connect command the
user selects the desired GC controller from a
list of the GC directory entries.
To configure the Connect/Logon Command,
1. Select Connect/Logon from the General
Configuration Commands pull-down list.
2. From the GC Entry list that is configured in
the File>GC Directory menu, select the
desired GC Controller.
3. Enter a description for the Connect/Logon
command in the Command Description
field.
Use the communication
method and parameters as
configured in the File>GC
Directory entry.