E-10 UPGRADE 2350A GC S/W AND 2350 EPROMS
MON2000
Disconnect Power and Disassemble JULY 2010
4. The Parameters screen displays.
5. Use the ARROW keys and space bar to select
the desired parameter and toggle between
its options.
6. Press the ENTER key to accept your changes
or press the ESC key to cancel.
E.5 DISCONNECT POWER AND DISASSEMBLE
PERSONELL AND EQUIPMENT
Failure to follow the instructions below, may cause injury to personnel or damage equipment.
Before you remove the cover from the GC Controller or access its internal electronics, switch
OFF the AC power source to the GC Controller, either at the breaker box or the controlling
power source switch.
Also, disconnect the AC power cord from J21 before continuing working on the unit.