Epson Scan 2500 service manual Removing the scanner motor, Frame as described in .7.1.3 above

EPSON Stylus Scan 2500 Revision A

4.7.2 Removing the scanner motor

1.Remove the rear cover and top cover as described in “Removing the Housing” on pag e82.

2.Pull out the circuit board tray as described in “Removal of the Circuit Board Tray” on pag e90.

3.Disconnect the scanner motor cable (CN13).

Using a 3M wrench, remove two nuts securing the motor.

CH E CWhenK installing the scanner motor, it is a good idea to P O I NremoveT the spring and loosen the left scanner guide

frame as described in Section 4.7.1.3 above.

Disassembly & Assembly Disassembly of the Scanner Mechanism 112