Epson Scan 2500 Openning the Start-up menu, Software-based Adjustment Procedures, Head ID Menu

EPSON Stylus Scan 2500 Revision A

5.3.2 Openning the Start-up menu

1.Connect the printer and PC and turn on the printer.

2.From the Start menu, select Programs>Program for Production>P00B01W The following screen appears.

Figure 5-4. Inital Menu

From the Startup menu you need to choose Head ID or Production depending on the adjustment procedure you perform. See the table below for details.

Table 5-4. Software-based Adjustment Procedures

Adjustment procedure	See	Then see
Input the head voltage	“Head ID Menu” on	“Head Voltage ID Input” on
	page 117	page 124
Charge ink		“Initial Ink Charge Operation”
		on pag e122
Adjust normal Bi-d		“Bi-D Adjustment” on
		page 122
	“Production Menu”
Adjust variable Bi-d	on page 120
Clean the printhead		“Head Cleaning Operation”
		on pag e123
Drain ink		“Ink draining” on pag e126
Reset EEPROM	Special
Clear ink counter

The following table gives a list of adjustment that are available on the service- related menus. Other menus and items are for production purposes only.

Table 5-5. Service Menu Items

Menu name	Operations available
Head ID Menu	Input Head ID
	Input the head voltage
	Charge ink
Production Menu	Adjust normal Bi-d
	Adjust variable Bi-d
	Clean the printhead
	Drain ink
Special	Reset EEPROM
	TClear ink counter

HEAD ID MENU

To enter the Head ID menu, follow these steps.

Adjustment Using the Service-Adjustment Program 117