Epson Scan 2500 service manual Fastener Head, Nozzle Selector has been enclosed into head

EPSON Stylus Scan 2500 Revision A

Step 6.		Fastener Head
Remove
the FFC		Step 8.
and FFC		Remove
guide.		one CBP
		3x6 screw
	FFC	and the
		fastener.

Make sure that this protrusion is in the U ditch of the print head side.

This part should be touching the CR shaft receiver.

Step 9. Remove the printhead.

Printhead Unit

Note: There are no

Step 7.

Remove the

tension spring located here.

Make sure that the protrusion of the carriage fits in this hole.

Carriage Assembly

actuators on the printhead.

Figure 4-3. Removing the Print Head

Nozzle Selector has been enclosed into head.

Figure 4-4. Installing the Printhead

Disassembly & Assembly Disassembling the Printer Mechanism 97