EPSON Stylus Scan 2500

Revision A

4.6.4.1 Disassembling the ASF Roller Assembly

1.Remove the ASF assembly. (Refer to Section 4.6.4.)

2.Remove the brake lever, releasing one leg of the torsion spring 41.2 from the hook of the ASF frame.

3.Remove the fixing shaft bushing from the right side of the LD roller shaft and the release hopper lever.

4.Move the left paper feed assembly to the center and remove the cam fixing bushing (white plastic) attached to the left side of LD roller shaft.

5.Push the LD roller shaft to the left and remove the left shaft fixing bushing after releasing its hook.

6.Remove the right and left sides of the hopper assembly from the protrusions on the ASF frame.

7.Lift up the right side of paper feed roller assembly a little, move the LD roller shaft to the right and remove it from the left side of the ASF frame.

8.Holding the hopper assembly by hand, remove the cam part of hopper assembly from the right holes of ASF frame.

See the next section for details on disassembling the paper-feed roller assemblies.

C H E P O I

 

During disassembly and assembly of the hopper

C K

 

assembly, do not let the grease on the cam parts

N T

T

touch other parts. Wipe off any grease smeared on

other parts.

Be careful of the direction of the hopper lever

release when installing it.

Make sure that the right and left fixing bushings are

installed steadily and do not slip off.

During assembly, attach the cam fixing bushing

after installing the LD roller shaft to the ASF frame.

When installing the right and left paper feed roller assemblies to the LD roller shaft, the black paper feed roller assembly goes on the right side and the one in the standard EPSON color goes on the left of the shaft.

Disassembly & Assembly

Disassembling the Printer Mechanism

101

Page 102
Image 102
Epson Scan 2500 service manual Disassembling the ASF Roller Assembly