Epson Scan 2500 service manual Control Panel, Buttons, Button functions, Power-on functions

EPSON Stylus Scan 2500 Revision A

1.6 Control Panel

Load/	Printout Size	Darker/	Quality	Copies	Copy	Stop/Clear
Eject	button	Lighter	button		button	button

LCD Panel

				Hold for	Return	Item	Operate
Cleaner				menu		Error
	Scan	Reduce/	B&W/Color			indicator	indicator
	button	Enlarge	button

Figure 1-8. Control Panel

1.6.1 Buttons

	Table 1-9. Button functions
Button	Function
Load/Eject	• Loads or ejects paper
(pushed within	• If the carriage is at the ink cartridge installation position,
two* seconds)	returns the carriage back to the home position.
Load/Eject	• Starts the ink cartridge replacement sequence (not
	available during printing.
(pushed for two*
	Shifts the carriage to the ink cartridge replacement
seconds)
	position.
Cleaning	• Starts the printhead cleaning cycle.
	• If the printer is in the “Ink Low” or “Ink Out” or “No Ink
(pushed for two*
seconds)	Cartridge” condition, starts the ink cartridge replacement
	sequence.
Cleaning	• If the carriage is at the ink cartridge replacement position,
(pushed within	returns the carriage from the ink cartridge replacement
two* seconds)	position to the home position.

* The user’s guide states three seconds.

		S
		Table 1-10. Power-on functions
Button		Function
Load/Eject		Prints a status sheet that includes firmware version, ink
		counter, and nozzle check patterns.
Load/Eject		Enters the special-settings mode (see table below), which
		remains active for three seconds. If neither the Load/Eject
+
		nor Cleaning button is pushed in that three seconds, normal
Cleaning
		initialization begins.
	Table 1-11. Special settings mode
Button		Function
Load/Eject		Resets the real-time counter (power-off time) in EEPROM
Cleaning
(hold for ten		Resets the waste ink overflow counter
seconds)

Product Description Control Panel 23