Epson Scan 2500 service manual Settings Menu, Scanner Initialization

EPSON Stylus Scan 2500 Revision A

SCANNER INITIALIZATION

There are three initialization methods.

1.Hardware initialization

The scanner initializes when turned on.

When the scanner initializes, the following actions are performed. Initialize scanner mechanism

Clear input/output data buffer Set default values

2.Operator initialization

The scanner initializes when it recognizes the -INIT signal (negative pulse) from the parallel interface.

When the scanner initializes, the following actions are performed.

Clear input/output data buffer

Set default values

3.Software initialization

The ESC@ command also initializes the scanner.

When the scanner initializes, the following actions are performed.

￿	Clear input/output data buffer
	Set default values

1.7 Settings Menu

Enter the settings menu mode by holding down the Quality and B&W/Color buttons. Settings are saved when the power is turned off.

Table 1-16. Settings Menu

Button	Function	LCD
		Hold Quality + B&W buttons for three
Quality	Change modes	seconds
		Menu Mode
B&W/
	Copy<-> Settings Menu
Color		After two seconds
		BottomMargin:14/3mm
		Cycles through the menus below:
		BottomMargin:14/3mm
Copies	Change menu in	PaperSize:Metric/US
+/-	Settings Menu mode	Lang:Eng Ger Fr Ital Span Port
		Set Factory Default
		Status Sheet Print
	Executes menu or	Lang: Eng Ger Fr Ital Span Port
Copy		Press copy to change to next
	selects item
		Lang: Ger Fr Ital Span Port Eng

Product Description Settings Menu 28