EPSON Stylus Scan 2500 Revision AProduct Description Control Panel 25
Quality
Sets copy quality
•B&W
Normal
Fine
• Color
Normal
Fine
Photo
Note: When Photo is selected, the LCD displays “Load
Photo Paper”.
Multiple
copies
•B&W
1-20
• Color
1-20
Increments by “1”, and increment speed increases if
held for more than one second.
Resets to 1
if Stop/
Clear
button is
pressed.
Enlarge/
Reduce
• Selects reduce or enlarge
• Default = 100%
• First press = LED shows current status
• Multiple presses (within 5 sec.s) = moves up one
setting each time
Example
First time = Enlarge/Reduce LED only (100%) activated
(default)
Second or more time = cycles through the following.
93% > 80% > 70% > 50%
200% > 141% > 120%
Printout Size
Sets the size of the printed paper during Local Copy
mode;
A size area = A4/B5/A6
Letter size area = Letter/Half Letter/5x8”
Brightness Sets the brightness level from -2>0>+2 in increments
of “1”.
Table 1-12. Copy button functions (cont.)
Button Function Notes Table 1-13. Settings Menu
Button Function LCD
Quality
B&W/
Color
Change modes
Copy<-> Settings Menu
Hold Quality + B&W buttons
for three seconds
Menu Mode
After two seconds
BottomMargin:14/3mm
Copies
+/- Change menu in
Settings Menu mode
Cycles through the menus
below:
BottomMargin:14/3mm
PaperSize: Metric/US
Lang: Eng Ger Fr Ital Span
Port
Set Factory Default
Status Sheet Print
Copy Executes menu or
selects item
Lang: Eng Ger Fr Ital Span
Port
Press copy to change to next
Lang: Eng Ger Fr Ital Span
Port