Epson Scan 2500 service manual Removing the printer mechanism

EPSON Stylus Scan 2500 Revision A

4.3.9 Removing the printer mechanism

1.Remove the rear cover and top cover as described in “Removing the Housing” on pag e82.

2.Remove the side covers as described in “Removing the side covers” on page 84.

3.Remove one screw (CBS 3x6) from the right-side frame.

4.Remove two screws (CBS 4x6) and two spacers.

Two screws and spacers

NOTE:

C H E P O I

T

As shown in the above photos, you do not have to remove the scanner frame or right-side frame to remove the printer mechansim.

When replacing the printer, you need to be careful about 1) the printer position on the base and 2) the spacer edge must be parallel to the printer frame.

Disassembly & Assembly Removing the Housing 88