Notices

Check these sections for important notices about your product.

Note: Epson offers a recycling program for end of life products. Please go to this site for information on how to return your products for proper disposal.

General Product Safety Instructions

FCC Compliance Statement

Software Notice

Trademarks

Copyright Notice

General Product Safety Instructions

Be sure to follow all warnings and instructions marked on the product.

Use only the type of power source indicated on the product's label.

Use only the power cord that comes with the product. Use of another cord may cause fires or shock. Do not use the cord with any other equipment.

Place the product near a wall outlet where the plug can be easily unplugged.

Avoid plugging the product into an outlet on the same circuit as a photo copier or air control system that regularly switches on and off, or on an outlet controlled by a wall switch or timer.

Do not let the power cord become damaged or frayed. Place it to avoid abrasions, cuts, fraying, crimping, and kinking. Do not place objects on top of it and do not allow it to be stepped on or run over. Be careful to keep the cord straight at each end.

If you use an extension cord with the product, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating.

Always turn off the product using the power button, and wait until the power light stops flashing before unplugging the product or cutting off power to the electrical outlet.

If you will not be using the product for a long period, unplug the power cord from the electrical outlet.

Place the product on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle.

256

Page 256
Image 256
Epson XP-520 manual General Product Safety Instructions