Note: To disconnect a peer-to-peer mode connection, release the connection to your product from your computer or other device. Your product will reconnect to the previously used network.

Enabling Wi-Fi Direct Mode

Parent topic: Wi-Fi Networking

Enabling Wi-Fi Direct Mode

You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or other devices without a wireless router or access point.

1.Press the home button, if necessary.

2.Press the arrow buttons to select Wi-Fi Setup and press the OK button. You see this screen:

3.Select Wi-Fi Direct Setup and press the OK button.

4.Select Connection Setup and press the OK button.

5.Press the down arrow button, then press the OK button to change the password.

Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will be disconnected when you change the password.

35

Page 35
Image 35
Epson XP-520 manual Enabling Wi-Fi Direct Mode