Chapter 5 Various Documents

4 Select the [Rotation] tab, and then select the [Split Image] checkbox.

Outputting in Multi-Image Mode

You can obtain both color/grayscale and binary black-and- white image outputs at a single scan (this is called the Multi Image Output function).

！This function is not supported by all applications.

When a document is scanned in Duplex Scan mode, the scanned back side image(s) are output according to the [Flip Side Rotation] settings in the order below:

•Book: Upper half D Lower half

•Fanfold: Lower half D Upper half

This function is not available with:

！• [Multi Image Output] selected

•[Color/Monochrome Auto Detection] selected

•the resolution set to 1200 dpi

5 Click the [OK] button.

⇒You are returned to the [TWAIN Driver (32)] dialog box.

6 In the [TWAIN Driver (32)] dialog box, click the [OK] button.

⇒Changes made are saved.

ABC ABC

OriginalCreated images

Example: When a color document is scanned

1 Load a target document on the scanner.

For how to load documents on the scanner, refer to "Chapter 2 Loading Documents" (on page 38).

2 Start up ScandAll PRO, and then open the [TWAIN Driver (32)] dialog box.

For how to open the [TWAIN Driver (32)] dialog box, refer to "Chapter 3 How to Use ScandAll PRO" (on page 51).

7 From ScandAll PRO, perform a scan.

For how to perform a scan, refer to "Chapter 3 How to Use ScandAll PRO" (on page 51).

101