Chapter 6 Daily Care
Feed Rollers | As a guideline, seven presses of the [Send to] and [Scan/Stop] |
The cleaning procedure is as follows: | buttons together makes the Feed Rollers to rotate one full turn. |
|
[Send to] button
Function
Scan / Stop
Check
Send to
Flatbed type
Check
Power
1With the power on, open the ADF when the Operator Panel indicates a code other than "P."
Note that the Feed Rollers will not rotate if you open the ADF and do the following action while "P" is indicated.
2Hold down the [Send to] and [Scan/Stop] buttons simultaneously on the Operator Panel. The Feed Rollers and Eject Rollers start to rotate by a certain angle.
Both the Feed Rollers and Eject Rollers turn at 
the same time. Do not touch the Feed Rollers
or Eject Rollers during cleaning if they are rotating.
3Hold a soft cloth moistened with Cleaner F1 against the surface of the rotating Feed Rollers and Eject Rollers so that the cloth wipes off the surface of the rollers lightly. Take particular care in cleaning these rollers as black debris on them adversely affects the feeding perfor- mance.
Function Number Display
Function
Send to
[Send to] button
Scan / Stop
[Scan/Stop] button
Power
120