
Chapter 9 Operational Settings
3 Select
Item | Description |
|
|
Scan extra 120 mm from the detected | |
document | bottom edge of the document. |
|
|
Document with tab | Scan extra 20 mm from the detected |
| bottom edge of the document. |
|
|
Document without | Terminates scanning at the time the |
tab | bottom edge of the document is detected. |
|
|
•The scanning speed slows down if [Document with
!tab] or
•When scanning a document with tab or a
•For how to specify "Auto Paper Size Detection," refer to "Automatically Correcting Skewed Document Images" (on page 87).
•When the connection is via SCSI/USB Connector 2, note that:
-You cannot select
-If you scan a document having a tab, which is smaller than A5, the tab image (in part or whole) may be lost.
-you cannot enable this setting together with [Scan Setting for Document in Dark Background Color]. If you enable this setting, the setting for [Scan Setting for Document in Dark Background Color] will auto- matically be disabled.
Scan Setting for The Document Whose One Side Is in Dark Background Color
[Scan Setting for Document in Dark Background Color]
You can specify whether or not to detect the edge of document in a dark background color during scanning.
You can specify a density of background color so the edge will be detected correctly.
If this option is enabled, the settings for scanning documents with tabs will automatically be disabled.
1 Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (on page 156).
2 From the tree listing on the left, select [Device Setting 2]
D[Scan Setting for Document in Dark Background Color]
D[Enable].
176