Chapter 9 Operational Settings
■Resetting the counters
Reset the consumables counter(s) every time you replace the consumable(s). Follow the procedure below.
1 Click the [Clear] button beside the replaced consumable.
2 Click the [OK] button on the confirmation message displayed.
⇒The counter is reset to 0.
The remaining ink indication (percentage) is reset to 100.
3 In the Software Operation Panel, click the [OK] button.
■Replacing and Cleaning Instructions
The following may sometimes appear while using the scanner: Replacing instruction:
Cleaning instruction:
According to the instruction displayed, clean the scanner or replace the consumables.
When you click the [Ignore] button, the cleaning instruction disappears and the scanning continues. You may be able to continue the scanning for a while, however, it is recommended that you replace the consumable(s) as soon as possible.
To stop the scanning and replace the consumable(s) right away, click the [Cancel] button.
For how to replace the consumables, refer to the following sections:
Pick Roller; see "7.2 Replacing the Pick Rollers" (on page 125). Brake Roller; see "7.3 Replacing the Brake Roller" (on page 127).
For how to clean the scanner, refer to "Chapter 6 Daily Care" (on page 114).
166