Chapter 9 Operational Settings
3 Use the slider control to adjust the scanned document output image.
Item | Description |
|
|
Overcrop | Crops the scanned document image a little larger |
| than the actual size, leaving black background |
| margins outside the image so that the data on the |
| edge of the image will not be lost. |
| The specifiable range is from 0 mm to 3 mm in incre- |
| ments of 1 mm. |
|
|
Undercrop | Crops the scanned document image a little smaller |
| than the actual size, leaving no black margins on the |
| edge of the image. |
| The specifiable range is from |
| increments of 1 mm. |
|
|
With the Overcrop option on; if the document you
！ scanned is wide, the black margins outside the document may not be included in the scanned image.
The scanned document output image will not be adjusted if 0 mm has been selected using the slider control.
Adjusting the Paper Picking Pressure [Pick Pressure]
Scanning a thick document at a regular paper picking pressure may force the Feed Rollers of the scanner to spin free without catching the document properly, causing scanning retries.
To avoid this, you can use this option to adjust the pick pressure to scan such documents.
1 Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (on page 156).
2 From the tree listing on the left, select [Device Setting 2]
D[Pick Pressure].
178