Fujitsu FI-6670A manual 134

Chapter 8 Troubleshooting

Device Errors			Indica	Item	Remedy
Device errors require recovery works by support engineers.			tion
			E2	Optical system error	Turn off and on the scanner again.
They are listed as follows:
				(Front-side scanning	If the error is still displayed on the
				thru the ADF)	Function Number Display, record
■Motor and Optical System Errors					the indicated error code, and
			E3	Optical system error
					contact the store where you
[E] and a number are displayed alternately.
				(Back-side scanning	purchased the scanner or an
				thru the ADF).	authorized FUJITSU scanner
Indica	Item	Remedy		(fi-6670/fi-6670A/fi-	service provider.
tion				6770/fi-6770A)
			E6	Operator panel error
E0	Flatbed motor malfunc-	1 Confirm that the Transfer Lock is
	tion	unlocked.	E7	Internal memory error
	(Flatbed type only)	2 Turn the scanner off and on
				(EEPROM)
E1	Flatbed optical system	again.
			E8	SCSI interface circuit
	malfunction
		If the error is still displayed on the		error
	(Flatbed type only)
				(fi-6670/fi-6670A/fi-
		Function Number Display, record
				6770/fi-6770A)
		the indicated error code, and
		contact the store where you	E9	Image memory error
		purchased the scanner or an
		authorized FUJITSU scanner	■ Overrun Errors
		service provider.
			[F] and a number are displayed alternately.
			Indica	Item	Remedy
			tion
			F2	Pick arm error	Turn off and on the scanner again.
					If the alarm is still displayed on the
			F4	Background switching
					Function Number Display, record
				mechanism error	the indicated error code, and
					contact the store where you
			F6	Fan error
					purchased the scanner or an
			F7	Heater error	authorized FUJITSU scanner
					service provider.
			F8
			F9

TOP

Contents

Index

Introduction

Scanner

Overview

Loading Documents

How to Use ScandAll PRO

Scan Parameters

Various

Documents

Daily Care

Consumables

Troubleshooting

Operational Settings

Appendix

Glossary

134