Chapter 1 Scanner Overview

1.6 Basic Flows of Scanning Documents

This section describes how to scan documents using the

2 Load a target document on the scanner.

scanner.

 

To scan documents with the scanner, a scanner driver and an

 

application supported by the driver are prerequisites.

 

Your scanner is accompanied with two drivers; a TWAIN-

 

compliant driver called FUJITSU TWAIN 32 Scanner Driver,

 

and an ISIS-compliant driver called FUJITSU ISIS Scanner

 

Driver; plus an application named ScandAll PRO, which

 

supports both the drivers.

 

• For details about the scanner drivers, refer to the following:

For how to load documents on the scanner, refer to "Chapter 2

- "Chapter 4 Scan Parameters" (on page 63)

Loading Documents" (on page 38).

- FUJITSU TWAIN 32 Scanner Driver Help

3 Launch an application you want to use for scanning.

- FUJITSU ISIS Scanner Driver Help

• For details of ScandAll PRO, refer to the following:

The following steps show example windows when ScandAll PRO is

- "Chapter 3 How to Use ScandAll PRO" (on page 51)

selected.

- ScandAll PRO Help

When ScandAll PRO is launched:

The flow of scanning documents depends on the interface with which the scanner is connected to your computer. The following provides the two types of scanning flows:

Connection via SCSI/USB Connector 1

1 Turn the scanner ON.

For how to turn on the scanner, refer to "1.4 Turning the Scanner ON and OFF" (on page 31).

•For a SCSI cable connection, be sure to turn on your

！computer AFTER turning on the scanner, and making sure number "1" indicates on the Function Number Display.

•Turn off the scanner and your computer first when you switch the interface cable.

For how to launch ScandAll PRO, refer to "3.2 Launching ScandAll PRO" (on page 53).

33