Chapter 1 Scanner Overview
Indications on the Function Number Display
Indication | Explanation |
|
|
8 | Blinks only one time upon turning on the scanner. |
|
|
P | Indicates that the scanner has been turned ON and is |
| being initialized. |
|
|
1 | Indicates that initialization has ended successfully. This |
| status is called "Ready Status" in which you can perform a |
| scan. |
|
|
J | Indicates that a recoverable error occurred during scan- |
U | ning. |
| "J" or "U" and an "error number" are displayed alternately. |
| For error details, refer to "Temporary Errors" (on page |
| 133). |
| After the error has been resolved, you can return to the |
| Ready Status (see "1" above) by pressing the [Stan/Stop] |
| or [Send to] button. |
|
|
E | Indicates that an abnormality (device error) occurred in the |
F | scanner during its initialization or during scanning docu- |
C | ments. |
H | "E", "F", "C", "H", "A", or "L" and an "error number" are dis- |
A | played alternately. |
L | For details of the errors, refer to "Device Errors" (on page |
| 134). |
| If this error occurs, turn the Main Power Switch OFF and |
| then ON again. If the error persists after this, contact the |
| store where you purchased the scanner or an authorized |
| FUJITSU scanner service provider. |
|
|
30