Chapter 7 Consumables
6 Attach the Brake Roller to the scanner.
1Put the Brake Roller by adjusting the flat section of the rotating shaft to the guide slot of the Brake Roller Holder.
2Close the Brake Roller Holder.
|
| Be careful, the ADF may close and pinch your |
| ||
| fingers. | |
|
|
|
|
|
|
•Do not close the ADF while the Brake Roller Cover is
！kept open.
•Confirm that the Brake Roller is attached firmly. If not, paper feed errors such as multifieeds will occur.
8 Reset the brake roller counter.
Start up the Software Operation Panel, and then reset the counter. For details, refer to "Resetting the counters" (on page 166).
7 Close the ADF.
Press down on the center of the ADF to return it to its original position until the ADF clicks into place.
128