Chapter 7 Consumables

2 Pull out the two Pick Rollers from the rotating shaft.

6

Attach the ADF Paper Chute.

 

7

Close the ADF.

 

 

Press down on the center of the ADF to return it to its original position

 

 

until the ADF clicks into place.

5 Attach new two Pick Rollers to the scanner.

1 Attach both of the two Pick Rollers to the rotating shaft.

Insert each roller so its socket will fit to the rotating shaft screw on the scanner.

￿￿￿￿￿￿￿

Be careful, the ADF may close and pinch your fingers.

！

•

Do not close the ADF while the Pick Roller Cover is

•

kept open.

 

Confirm that the Pick Rollers are attached firmly. If

 

 

not, paper feed errors such as paper jams will occur.

 

 

 

8 Reset the pick roller counter.

Start up the Software Operation Panel, and then reset the counter.

For details, refer to "Resetting the counters" (on page 166).

2Close the Pick Roller Cover. Confirm that both sides of the cover are locked firmly.

126