Chapter 5 Various Documents

3 Select the [Document separator] tab, and then select the [Use Patchcode-Based Job Separation Sheet] checkbox.

•To suppress the scanning of patch code sheet images, check the [Remove separation sheet] checkbox.

•In Duplex Scan mode, you can disable the scanning of the back side of patch code sheet by selecting the [Remove the next page of a separation sheet] check- box.

4 Insert the patch code sheets wherever you want the file/ folder to separate.

Load the document with the patchcode-printed sheets face down on the ADF Paper Chute.

Patch code printed sheet

5 Using the batch profile you created above, perform a batch scan.

For how to perform a batch scan, refer to "3.8 Scanning with [Batch Scan]" (on page 61).

The following is the procedure for saving the scanned document images, which are divided by patch code sheets, in separate folders.

1Click the [Name Rule] button on the [File format and

Name scheme] tab in the [Profile Editor] dialog box. ⇒ The [Name Rule] dialog box appears.

2Select the [Create Directories Separately] checkbox.

96