Chapter 7 Consumables

7.1 Consumables and the Replacement Cycles

The following table shows the consumables and their standard replacement cycles.

Consumable

Part No.

Standard Replacement Cycle

 

 

 

Pick Roller

PA03338-

After scanning of 250,000

 

K011

sheets or one year

Brake Roller

PA03576-

After scanning of 250,000

 

K010

sheets or one year

The replacement cycles above are rough guidelines for the case of using A4/Letter-sized woodfree or wood containing paper of 80 g/m2 (21.0 lb) in weight. This cycle varies according to the type of the paper used and how frequently the scanner is used and cleaned.

Use only the specified consumables to avoid document feeding troubles.

To purchase the consumables, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider.

Please understand that some parts may need replacement by service engineer depending on the scanned document type or its duty of scannning. For further information, contact the FUJITSU scanner service provider.

The consumables must be replaced periodically. Order new consumables before the consumables on the scanner reach the end of their service life. It is recommended that you keep a stock of new consumables. By referring to the numbers of scanned sheets counted at each replacement of the rollers (Brake Roller and Pick Rollers), you can judge when you will need to replace the rollers next time.

If you want to check the counted values for the rollers, refer to "9.3 Settings Related to Consumables and Useful Life Counters" (on page 165).

124