Chapter 8 Troubleshooting
Scanned images are elongated when scanned from the ADF.
Are the rollers dirty? |
|
|
| Clean the rollers. | |||
|
|
| |||||
|
|
|
|
|
| For how to clean the rollers, refer to "6.2 Cleaning the ADF" (on page 117). | |
|
|
| YES | ||||
|
|
|
| ||||
NO |
|
|
| ||||
|
|
| |||||
|
| ||||||
|
|
|
|
|
|
| |
Does the document satisfy the requirements described in |
|
|
| Use documents that satisfy the requirements. | |||
|
|
| |||||
Precautions in "Paper Quality" (page 42)? |
|
|
| For information about the document requirements, refer to "2.2 | |||
NO | |||||||
|
|
| |||||
|
|
|
|
|
|
| |
YES 
Is any of the consumables (*1) worn out?
NO 
Did you adjust the scan scale?
YES
YES
NO
Check the consumables counters. Replace the consumables, if needed.
For how to replace the consumables, refer to "Chapter 7 Consumables" (on page 123).
In the [Device Setting] menu in the Software Operation Panel, adjust the scan scale in the feeding direction.
For how to adjust the scan scale, refer to "Adjusting the Starting Position for Scanning [Offset/Vertical Magnification Adjustment]" (page 169).
If you cannot solve the problem after taking the measures above, check the items shown in "8.4 Before Contacting Your Dealer or Scanner Service Provider" (on page 152), and then contact the dealer where you purchased the scanner or an authorized FUJITSU scanner service provider.
149