Fujitsu FI-6670A 173

Chapter 9 Operational Settings

Shorting the Scanning Intervals				• While Pre-Pick is enabled, if you cancel the scanning
[Pre-Pick]				in process, you will have to eject all the pre-picked
				document sheets and reload them.
				document sheets and reload them.
In the case of consecutive scanning, you can direct the				• This setting can also be specified from the scanner
In the case of consecutive scanning, you can direct the				driver’s setting dialog box. Note the setting with the
scanner to previously pick the document to be scanned next.				driver’s setting dialog box. Note the setting with the
scanner to previously pick the document to be scanned next.				scanner driver is given a priority.
This operation is called Pre-Pick.
This operation is called Pre-Pick.
By enabling "Pre-Pick," the time interval between the scanning
of two separate documents can be shortened.
1 Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (on page
156).