Fujitsu FI-6670A 5.2 Scanning Documents of Different Types or Sizes

Select [ADF (Duplex)] under [Scan Type].

For how to load documents on the ADF Paper Chute, refer to "2.1 Loading Documents on the ADF" (on page 39).

2 Start up ScandAll PRO, and then open the [TWAIN Driver (32)] dialog box.

For how to open the [TWAIN Driver (32)] dialog box, refer to "Chapter 3 How to Use ScandAll PRO" (on page 51).

Scanning Both Sides of A Document

(fi-6670/fi-6670A/fi-6770/fi-6770A Only)

Chapter 5 Various Documents

Scanning A Large-Size Document or Book (Flatbed Type Only)

1 Load a target document on the ADF Paper Chute.

1 Holding the handle, lift up the Document Cover.

2 Place a target document page on the Document Bed face down and the top left corner aligned to the reference point.

4	Specify a desired paper size from [Paper Size], etc.
5	Click the [OK] button.
	⇒ The changes made are applied.	3 Start up ScandAll PRO, and then open the [TWAIN Driver
6	From ScandAll PRO, perform a scan.	3 Start up ScandAll PRO, and then open the [TWAIN Driver
6	From ScandAll PRO, perform a scan.	(32)] dialog box.
	For how to perform a scan, refer to "Chapter 3 How to Use ScandAll	For how to open the [TWAIN Driver (32)] dialog box, refer to "Chapter
	PRO" (on page 51).	3 How to Use ScandAll PRO" (on page 51).